audio-technica AT-OC9XEB Moving Coil Cartridge

$469.00

Introducing Audio-Technica’s new AT-OC9XEB cartridge.

The AT-OC9XEB is a premium moving coil phono cartridge with a 0.3 x 0.7 mil Elliptical Bonded stylus. The OC9X range features a new Dual Moving Coil structure, which enables the audio information in the record grooves to be separated to the left and right channels with pinpoint accuracy. This improved channel separation results in a more precise stereo image and wider frequency response. The moving coil wires in all OC9X Series cartridges are made from PCOCC (Pure Copper by Ohno Continuous Casting), for optimum signal purity.

 



Description

audio-technica AT-OC9XEB

Elliptical (Bonded) Moving Coil Cartridge

The AT-OC9XEB is a premium moving coil phono cartridge with a 0.3 x 0.7 mil Elliptical Bonded stylus.

The OC9X range features a new Dual Moving Coil structure, which enables the audio information in the record grooves to be separated to the left and right channels with pinpoint accuracy. This improved channel separation results in a more precise stereo image and wider frequency response. The moving coil wires in all OC9X Series cartridges are made from PCOCC (Pure Copper by Ohno Continuous Casting), for optimum signal purity.

The AT-OC9XEB’s transducer engine is mounted onto a rigid aluminium body to help reduce unwanted internal vibrations and maintain sonic clarity. The cartridge bodies are pre-threaded, enabling them to be easily mounted to a head shell or tone arm with just two screws (no mounting nuts for the screws are required). Each OC9X Series cartridge is supplied with mounting hardware, a stylus brush and other accessories.

Features

  • 0.3 x 0.7 mil Elliptical Bonded stylus
  • Made from PCOCC (Pure Copper by Ohno Continuous for optimum signal purity
  • Aluminium body and cantilever to help reduce unwanted vibrations and maintain sonic clarity
  • Threaded inserts in cartridge body enable cartridge to be mounted to head shell with just two screws, no nuts required

Specifications

  • Type: Dual moving coil (MC)
  • Frequency response: 20 to 30,000 Hz
  • Output voltage: 0.32mV (1 kHz, 5 cm/sec.)
  • Channel separation: 25 dB (1 kHz)
  • Channel balance: 1.5 dB (1 kHz)
  • Tracking force: 1.8 to 2.2 g (standard: 2.0 g)
  • Coil impedance: 12Ω(1kHz)
  • DC resistance: 12µH
  • Recommended load impedance: Min. 100 O (when head amplifier is connected)
  • PCOCC coil wire
  • Static compliance: 20 x 10 ^(–6) cm / dyne
  • Dynamic compliance: 9 x 10 ^(–6) cm / dyne (100 Hz)
  • Stylus: Elliptical Bonded 0.3 x 0.7 mil
  • Cantilever: Aluminium pipe
  • Vertical tracking angle: 20 degrees
  • Dimensions: 17.3(H) x 16.8(W) x 25.7(L) mm
  • Weight: 7.6 grams

To view the next level up the audio-technica food chain try AT-OC9XSL

To view a nice review of this moving coil cartridge go to HiFi News

Reviews

There are no reviews yet.

Be the first to review “audio-technica AT-OC9XEB Moving Coil Cartridge”

Your email address will not be published. Required fields are marked *

Have a Question?

If you have any questions about this product, please don't hesitate to get in touch with us via:
  • Our address: 1/81 Guthrie St Osborne Park Western Australia 6017
  • Our phone: 08 9445 2783
  • Our email: pierre [@] revolutionturntable.com.au OR jim [@] revolutionturntable.com.au
Or fill in the form below and we will get back to you as soon as possible.

    Your Name (required)

    Your Email (required)

    Your Phone (required)

    Your Message

    Title

    Go to Top