Parasound New Classic 275 v2 Power Amp

$1,990.00

New Classic 275 v2 Stereo Power Amplifier

At the heart of the New Classic 275 V2 is a powerful 90wpc into 8 ohms that can also drive 4 and 2 ohm loads with ease with a peak current capability of 20 amps. A minor wonder in such a compact chassis. A useful assortment of configuration options allows for two sets of speakers, driven separately or together, bridge mode (200watts) and all the required inputs and outputs to allow for custom installations. The 275 V2 power amp is perhaps Parasound’s most affordable, powerful and versatile product yet.



Description

New Classic 275 v2 Stereo Power Amplifier

Overview:-

The Parasound New Classic 275 V2 along with the New Classic 200 Pre and the 200 integrated represent a new generation of affordable high performance audio products from Parasound. At the heart of the New Classic 275 V2 is a powerful 90wpc into 8 ohms that can also drive 4 and 2 ohm loads with ease with a peak current capability of 20 amps. A minor wonder in such a compact chassis.

A useful assortment of configuration options allows for two sets of speakers, driven separately or together, bridge mode (200watts) and all the required inputs and outputs to allow for custom installations. The 275 V2 power amp is perhaps Parasound’s most affordable, powerful and versatile product yet.

Features:-

  • 90 watts x 2 into 8 Ω (all channels driven)
  • 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
  • 200 watts x 1 bridged into 8 Ω or 4 Ω
  • 20 amps peak current per channel
  • 2 Ohm stable operation with load selector switch
  • Two pairs of speaker outputs with front panel A/B buttons
  • Rear-mounted lockout switch disables front A/B buttons
  • High pass filter, switchable for 20Hz or 40Hz
  • Automatic on/off by DC trigger with looping output
  • Automatic on/off by audio signal with 2 sensitivity settings
  • Fully discrete circuitry with high current toroid transformer
  • Bridging switch for stereo or mono operation
  • Efficient, low heat design
  • DC Servo and relay protection circuits
  • Rear-mounted left and right gain controls
  • Standby, channel status and high temperature indicators
  • Gold-plated RCA input jacks
  • Heavy duty 24k gold-plated 5-way speaker terminals
  • 115/230v selector on rear panel

Specification:-

  • Power Output – ( 20 Hz – 20 kHz):  90 watts x 2 (8Ω),  150 watts x 2 (4Ω),  150 watts x 2 (2Ω, Load switch set to 2-3Ω)
  • Bridged Mono:  200 watts x 1 (8Ω),  200 watts x 1 (4Ω Load switch set to 2-3Ω)
  • Current Capacity:  20 amps peak per channel
  • Frequency Response:  20 Hz – 50 kHz, +0/-3 dB, 1 watt
  • Dynamic Headroom: 1.3 dB
  • Total Harmonic Distortion:  0.35% at full rated output,  0.025% at average listening levels
  • IM Distortion: 0.05 %
  • Transient IM Distortion: Not measurable
  • S/N Ratio:  110 dB at rated output (IHF A-weighted),  93 dB at 2.828 V output (IHF A-weighted)
  • Input Impedance: 33 k Ω
  • Input Sensitivity: 800 mV for full rated output (28dB)
  • Inter-Channel Crosstalk: 80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
  • Damping Factor: Over 150 at 20Hz
  • 12V Trigger Turn On:  DC 9 – 12V, 15 mA
  • Audio Turn On: Quieter: 1 mV, Louder: 6 mV
  • AC Power Requirement: 220 -240 V, 50 – 60 Hz, 0.5 watts standby, 25 watts Idle (no audio), 350 watts full output
  • Dimensions: 437 x 406 x 63mm, W x D x H
  • Net Weight: 20 lbs (9.1 kg)
  • Rack Mount Accessory: May be Purchased Separately RMK11

We have one of these for demonstration so come in for a listen.

The view the matching Parasound pre amplifier go to New Classic 200Pre

To read an independent review go to Audio beatnik

Reviews

There are no reviews yet.

Be the first to review “Parasound New Classic 275 v2 Power Amp”

Your email address will not be published. Required fields are marked *

Have a Question?

If you have any questions about this product, please don't hesitate to get in touch with us via:
  • Our address: 1/81 Guthrie St Osborne Park Western Australia 6017
  • Our phone: 08 9445 2783
  • Our email: pierre [@] revolutionturntable.com.au OR jim [@] revolutionturntable.com.au
Or fill in the form below and we will get back to you as soon as possible.

    Your Name (required)

    Your Email (required)

    Your Phone (required)

    Your Message

    Title

    Go to Top