Audio-Technica AT-VM95E MM Stereo Cartridge


The AT-VM95E elliptical stylus cartridge is the entry-level 95 Series model in Audio-Technica’s new VM cartridge line. A line that harks back to Audio Technica’s early days as a manufacturer primarily of high end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM95E is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove. This ensures outstanding channel separation and extended frequency response. The cartridge’s elliptical bonded stylus tracks the centre of the record groove for reliable performance and excellent fidelity. Includes mounting hardware.



audio-technica VM95E


This VM95E Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. 


  • VM95E Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminium cantilever
  • Specially wound coils increase output voltage
  • Threaded inserts in cartridge body enable cartridge to be mounted to head shell with just two screws – no nuts required
  • Durable low resonance polymer housing
  •  Compatible with any AT-VMN95 replacement stylus


  • Frequency Response: 20-22,000 Hz
  • Channel Separation: 20 (dB at 1 kHz)
  • Channel Balance: 2.0 dB (1 kHz)
  • Vertical Tracking Angle: 23°
  • Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Recommended Load Impedance: 47,000 ohms
  • Load Capacitance: 100-200 pF
  • Coil Impedance: 3.3 k ohms (1 kHz)
  • Static Compliance: 35 x 10-6 cm/dyne
  • Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz)
  • Output Voltage: 4.0 mV (at 1 kHz, 5 cm/sec
  • Mount: Half-inch
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminium pipe
  • Stylus Construction: Bonded round shank
  • Dimensions: 17.2 mm H x 18.9 mm W x 28.3 mm D
  • Weight: 6.1 g
  • Accessories: Two 11mm installation screws, two 8mm installation screws, two washers
  • Replacement Stylus: AT-VMN95E

For other examples of Audio-Technica’s MC cartridges try AT-OC9

Have a Question?

If you have any questions about this product, please don't hesitate to get in touch with us via:
  • Our address: 1/81 Guthrie St Osborne Park Western Australia 6017
  • Our phone: 08 9445 2783
  • Our email: pierre [@] OR jim [@]
Or fill in the form below and we will get back to you as soon as possible.

Your Name (required)

Your Email (required)

Your Phone (required)

Your Message