audio-technica AT6006R Tonearm Safety Raiser


AT6006 Safety Raiser

Hallelujah, Finally, someone has decided to re-release one of the most useful and desirable turntable accessorys known to humankind. 99.99% of proper turntables these days are manual devices. That means at the end of playing a side, one must get up and manually lift off the playing arm. There are reasons for this. The mechanics and electronics needed to achieve “auto stop” will invariably impinge on the sound quality of even the most modest turntable, let alone premium examples.

Problem is, after being drawn into a wonderful passage music, whether classical. rock, blues, motown, country, folk or whatever, one is unlikely to be in a conducive state to spring out of ones chair. Add to that the audio enhancing effects of that wonderful audio tweek otherwise known as vino, beer and spirit then the needle may just stay in the run out grooves for a bit (lot) longer!!

Safety Raiser is an affordable and well engineered solution for this “end of record” issue. It is a smooth precision operating device and will not downgrade the looks of  high end turntable systems.

These will be available at the end of January 2019 and we are taking preorders now


AT6006R Safety Raiser


Designed to mount on a manual turntable, the AT6006R Safety Raiser automatically lifts the tonearm at the end of a record, protecting the stylus from damage. The raiser is equipped with a highly sensitive release antenna and a hydraulic lift with rubber lift bar, ensuring safe, smooth and dependable operation. Height adjustment knob and included spacers allow the raiser to be used with a wide variety of turntables with different tonearm heights. 


  • Lifts tonearm automatically at the end of a record, protecting stylus tip
  • Hydraulic lift with rubber lift bar operates safely and smoothly
  • Can be mounted on a variety of turntables with different tonearm heights
  • Including different spacer to adjust the height


Dimensions: 14 mm (0.55″) diameter × 27 mm (1.06″) to 39 mm (1.54″) height* 
Lift bar movable width: 3 mm (0.12″) 
Weight: Approx. 21 g (0.74 oz) 
Accessories: Double-sided tape ×4, Spacer ×2 (14 mm (0.55″) diameter × 12 mm (0.47″) height; 14 mm (0.55″) diameter × 24 mm (0.94″) height) 

To view another (cheaper) tonearm lifter try Pro-Ject Qup

To read a review on this Device try VinylEngine

To read a blog about tonearm lifters try Steve Hoffman


There are no reviews yet.

Be the first to review “audio-technica AT6006R Tonearm Safety Raiser”

Your email address will not be published. Required fields are marked *

Have a Question?

If you have any questions about this product, please don't hesitate to get in touch with us via:
  • Our address: 1/81 Guthrie St Osborne Park Western Australia 6017
  • Our phone: 08 9445 2783
  • Our email: pierre [@] OR jim [@]
Or fill in the form below and we will get back to you as soon as possible.

Your Name (required)

Your Email (required)

Your Phone (required)

Your Message